2PCS Thick Silicone Car CV Boot Repair Kit with CV Boot Clamp Tool for 2.42"/3.02"/3.52" Calibers,Cuttable CVs Axle Boots Repair Kit for Dust Protection,Upgraded CVs Joint Boots Kits

CAR CV BOOT REPAIR KIT, A NECESSARY ACCESSORY TO AVOID WEAR AND TEAR OF PARTSProduct AttributesColors: BlackSizes: Car CV Boot: Total Size: 5*3.88*3.88 inch Small Opening ID: 0.91 inch Caliber: 2.42 inch / 3.02 inch / 3.52 inch Cutting Pliers Length: 8.86 inchWeight: 17.22 ozMaterial: Silicone, Carbon SteelPackaging: Car CV Boot*2, Clamp*4 (Large*2, Small*2), Cutting Pliers*1, Ties*6Instructions for UseCar CV Boot:1. Place the car CV boot expander tool on the universal joint2. Flip the car CV axle boot, align the small opening with the small opening of the car CV boot expander tool, and then push it in firmly. You can apply some lubricant to the surface of the tool (car CV boot expander tool is not included in the package)3. After pushing it in, take out the clamp or tie to secure it. The excess length of the clamp is cut off with a pair of cutting pliersCutting Pliers:1. Align the jaws of the shearing pliers with the band and fully embed the excess of the band into the bayonet area of the jaws2. After inserting the band, hold the rocker of the cutting pliers and turn it slowly, keeping an even force during the turning process3. When the clamp is tightened to the right degree, without taking off the cutting pliers, turn the tool over and rotate the other lever to cut off the excess band at once4. Finally, use pliers or a hammer to tap on the bumps (i.e., the fixed part of the clamp) to further lock the clampProduct Functions & Features1. Please check the size information carefully before you buy to avoid being unable to use it after receiving it2. We specially choose thickened silicone as the main material of car CV axle boot, compared with ordinary silicone, further strengthen the structural strength, not easy to appear hardening, embrittlement, and can maintain elasticity

• Important Size: The total size of our car CV axle boot is 5*3.88*3.88 inch, the inside diameter of the small opening at the top is 0.91 inch, applicable to the shaft range of 22-23 mm, and there are 3 cuttable calibers at the bottom, which are 2.42 inch / 3.02 inch / 3.52 inch respectively
• Thickened Silicone: Silicone is used as the main material of the car CV joint boot, which is thickened to allow the boot to flexibly cope with various stress scenarios in the process of use, avoiding the problem of cracking for your long-term use
• Upgrade Kit: In addition to the regular clamps, car CV boots, and ties in our car CV boot kit, we also provide you with special cut-off pliers, which solves the problem of the details in the repair, and can easily cut off the excess length of the clamps (no car CV boot expander tool in package)
• Good Protection: If the CV joints are not protected, they will easily come into contact with external dust, mud, etc., which will lead to wear and tear of the parts. Using our car CV axle boot kit, we can reduce the contact with dust from the root and effectively slow down the wearing of the parts
• Steps for Use: 1. Place the car CV boot expander tool on the universal joint. 2. Flip the car CV axle boot, align it with the car CV boot expander tool, and push it in firmly. 3. Take out the clamps or ties to secure them. The excess length of the clamp is cut off with a pair of cutting pliers