O'SKOOL Miter Max Corner Clamp for Woodworking, Making Window Casing, Making Door Casing, Crafting Projects

1. Package：1PC. 2. Only one clamp is required to do a corner joint. 3. This miter clamp is made from heavy gauge steel and solid brass, rust proof and rugged construction. 4. Easy to making window casing, making door casing, etc. Tight clamps casing for the perfect glue joint every time. 5. Adjustment screw：Pin are retractable, if you don't need more pins, you can use 1/8 inch (3mm) hex wrench to adjustment pin quantity 6. Turn one-half turn of the handle, the pins will insert into the wood with rotation, make sure the wooden junction connected tightly for holding miters together while gluing 7. Put glue on miter then turn handle, and you will see excessive glue squeeze out down. Use a damp (not wet) cloth to remove excess glue from the joint. You get a perfect glue joint.

• Turn one-half turn of the handle, the pins will insert into the wood with rotation, make sure the wooden junction connected tightly for holding miters together while gluing. This tool is ideal for making photo frames, and can also make the assembly of door and window casings faster and simpler.
• This miter clamp is made from heavy gauge steel and solid brass. The rustproof and rugged construction ensures these clamps will be reliable for a long time.
• The pins on the miter clamp bite into the wood to keep it in place. It does leave a few dimples in the edge of the wood, but so would spring clamps or nails, you just fill those hole.
• The jig's unique cam design exerts such pressure on mitre joints that wood piece can be hauled around by one leg immediately after gluing. You get a perfect glue joint as in glue joint with our miter clamps.
• Package: 1pc